115. Ignition Coil Module Installation - Right

Ignition Module Installation - Right





1. Install the rear lift bracket.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the rear lift bracket bolts.
Tighten the rear lift bracket bolts to 47 Nm (35 ft. lbs.).




3. Install the right spark plugs.
Tighten the spark plugs to 15 Nm (11 ft. lbs.).





4. Install the ignition coil assembly.
5. Install the ignition coil assembly bolts and ball studs.
Tighten the ignition coil assembly bolts and ball studs to 10 Nm (89 inch lbs.).





6. If equipped, install the fuel injector sight shield bracket.
7. Install the fuel injector sight shield bracket bolts.
Tighten the fuel injector sight shield bracket bolts to 10 Nm (89 inch lbs.).





8. Install the ignition coil assembly sight shield cover.