HVAC Control Module Replacement - Auxiliary

HVAC CONTROL MODULE REPLACEMENT - AUXILIARY

REMOVAL PROCEDURE




1. Using a flat bladed tool, carefully pry out on the top of the auxiliary HVAC control module.
2. Remove the auxiliary HVAC control module from the center console/seat.




3. Disconnect the electrical connector.
4. Remove the auxiliary HVAC control module from the vehicle.

INSTALLATION PROCEDURE




1. Connect the auxiliary HVAC control module electrical connector.




2. Install the bottom of the auxiliary HVAC control module in the console first.
3. Push in at the top of the auxiliary HVAC control module in order to engage the control in the console/seat.