Wheel Speed Sensor Ring Replacement - Rear

Wheel Speed Sensor Ring Replacement - Rear

^ Tools Required
- J 44253 ABS Reluctor Installer

Caution: Refer to Brake Dust Caution in Service Precautions.

Removal Procedure





1. Remove the wheel speed sensor (2).





2. Important: Do not reuse the wheel speed sensor reluctor after it has been removed.

Remove and discard the wheel speed sensor reluctor (1).

Installation Procedure





1. Apply Loctite� to the inner portion of the wheel speed sensor reluctor (2).
2. Insert the wheel speed sensor reluctor (2) onto the hub assembly.
3. Install the ring (1) of the J 44253 onto the wheel speed sensor reluctor.





4. Insert the J 44253 (1).

5. Important: Turn the J 44253 until it just touches the ring of the J 44253.

Turn the J 44253 (1) to thread the wheel speed sensor reluctor.
6. Install the wheel speed sensor.