21. Forward Clutch ASM and Low Reverse Band Removal

Forward Clutch Asm and Low Reverse Band Removal

^ Tools Required
- J 39053 Forward and Coast Clutch Assembly Puller





1. Rotate the transmission so that the forward clutch assembly (626-834) faces up.
2. Remove the two 13-mm forward clutch support bolts (5) from the case.





3. Caution: The forward and coast clutch assembly weighs approximately 50 lbs. Personal injury may result if you drop the assembly.

Install the J 39053. Using a chain hoist or suitable lifting equipment, secure and lift the forward and coast clutch assembly (626-834) out of the case.





4. Remove the fretting ring (835).
5. Remove the Lo and Reverse band (13).