Instrument Panel Module Replacement (RHD)

INSTRUMENT PANEL MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the instrument panel compartment.




2. Remove the screws securing the dash integration module to the module bracket.
3. Disconnect the electrical connectors.

INSTALLATION PROCEDURE




1. Connect the electrical connectors.
2. Install the module to the bracket.
3. Install the screws that secure the module to the bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Install the instrument panel compartment.
5. Reprogram the module. Programming and Relearning