Antenna, Radio: Service and Repair

RADIO ANTENNA MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the rear sail panels.
2. Remove the rear assist handles.
3. Remove the rear roof mounted dome lamp.
4. Carefully lower the rear of the headliner to access the antenna module.




5. Disconnect the coax cables (3,4).
6. Disconnect the electrical connector (1).
7. Slide the diversity antenna module (2) off the mounting bracket.

INSTALLATION PROCEDURE




1. Install the diversity antenna module (2) on to the mounting bracket.
2. Connect all the electrical connectors (1, 3, 4).
3. Install the rear roof mounted dome lamp.
4. Install the rear assist handles.
5. Install the rear sail panels.
6. Refer to Control Module References for programming and setup information. Programming and Relearning