Rear Seat Armrest Replacement

REAR SEAT ARMREST REPLACEMENT

REMOVAL PROCEDURE
1. Remove the seat back from the vehicle.




2. Release the seat back lower J channel (1) to gain access to the armrest retainers.




3. Remove the armrest retaining nuts (1).
4. Remove the armrest from the seat back.

INSTALLATION PROCEDURE
1. Install the armrest to the seat back.




2. Install the armrest retaining nuts (1).

NOTE: Refer to Fastener Notice.

Tighten the retaining nuts to 10 N.m (88 lb in).




3. Fasten the seat back cover J channel (1).
4. Install the seat back into the vehicle.