81. Oil Pan Assemble

Oil Pan Assemble





1. Install a NEW oil suction tube seal onto the oil suction tube. DO NOT reuse the old oil suction tube seal.





2. Install the oil suction pipe.

3. Notice: Refer to Fastener Notice in Service Precautions.

Install the oil suction pipe bolts.
^ Tighten the oil suction pipe bolts to 10 Nm (89 inch lbs.).





4. Install the oil pan scraper.
5. Install the oil pan scraper bolts.
^ Tighten the oil pan scraper bolts to 10 Nm (89 inch lbs.).





6. Install the oil pan drain plug and NEW O-ring seal.
^ Tighten the oil pan drain plug to 20 Nm (15 ft. lbs.).





7. Install the oil level/condition sensor.
8. Install the oil level/condition sensor bolt.
^ Tighten the oil level/condition bolt to 10 Nm (89 inch lbs.).