Instrument Panel Insulator Panel Replacement - Left Side

INSTRUMENT PANEL INSULATOR PANEL REPLACEMENT - LEFT SIDE

REMOVAL PROCEDURE




1. Remove the screws (2) securing the closeout panel to the instrument panel (I/P).
2. Disconnect the courtesy lamp electrical connector (1).
3. Remove the closeout panel from the I/P.

INSTALLATION PROCEDURE




1. Connect the courtesy lamp electrical connector (1).
2. Align the closeout panel on the I/P.

NOTE: Refer to Fastener Notice.

3. Install the closeout retaining fastener (2).

Tighten the fasteners to 2 N.m (18 lb in).