Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust

CAMSHAFT POSITION SENSOR REPLACEMENT - BANK 2 (LEFT SIDE) EXHAUST

REMOVAL PROCEDURE
- Turn the ignition OFF.
- Remove the power steering fluid reservoir bolts and reposition the power steering fluid reservoir in order to provide access.

IMPORTANT: Do not disconnect the power steering fluid lines/hoses from the reservoir.




- Remove the camshaft position (CMP) sensor electrical connector.




- Remove the CMP sensor bolt.
- Remove the CMP sensor.

INSTALLATION PROCEDURE




- Install the CMP sensor.
- Install the CMP sensor bolt.

NOTE: Refer to Fastener Notice.

Tighten the CMP sensor bolt to 10 N.m (89 lb in).




- Install the CMP sensor electrical connector.
- Install the power steering fluid reservoir.