Steering Wheel: Service and Repair

Steering Wheel Replacement

Tools Required
^ J1859-A Steering Wheel Puller
^ J42578 Steering Wheel Puller Legs

Removal Procedure





1. Caution: Refer to SIR Caution in Service Precautions.

Disable the SIR system. Refer to Restraint System Disabling and Enabling Zone 3.
2. Remove the inflatable restraint steering wheel module.
3. Disconnect the steering column electrical connector.





4. Remove the steering wheel retaining nut.





5. Install J42578 and J1859-A to the steering wheel.
6. Using J42578 and J1859-A, remove the steering wheel.

Installation Procedure





1. Install the steering wheel.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the steering wheel retaining nut.

Tighten the nut to 41 Nm (30 ft. lbs.).





3. Connect the steering column electrical connector.
4. Install the inflator module.
5. Enable the SIR system. Refer to Restraint System Disabling and Enabling Zone 3.