14. Extension Housing Assemble

Extension Housing Assemble

^ Tools Required
- DT-47721 Shift Shaft Seal Installer
- DT-47725 Extension Housing Bearing Cup Installer
- J 21128 Axle Pinion Oil Seal Installer
- J 36614 Inner Pinion Bearing Installer





1. Using DT-47725 (2) and J 36614 (1), install the tapered bearing race (89).





2. Apply gear oil and install the tapered roller bearing (89).





3. Using J 21128, install a NEW rear output seal (92).





4. Using DT-47721, install a NEW shift shaft seal (88).