5. Transmission Case Disassemble

Transmission Case Disassemble

^ Tools Required
- DT-47722 Shift Rail Bushing Remover and Installer
- J 2619-01 Slide Hammer
- J 26941 Bushing and Bearing Remover 3-4 in

Rear Case Disassemble





1. Remove the oil trough (17).





2. Remove the bolt (38) and retainer (21).
3. Remove the gasket (29).





4. Using J 26941 (2) and J 2619-01 (1), remove the counter gear roller bearing (138).





5. Using DT-47722, remove the shift shaft bearing (25) from the case.

Middle Case Disassemble





Using DT-47722, remove the shift shaft bearing (8) from the middle case.

Clutch Housing Disassemble





Remove the input shaft seal (12) from the front case (11).