6. Extension Housing Disassemble

Extension Housing Disassemble

^ Tools Required
- DT-47721 Shift Shaft Seal Installer
- J 2619-01 Slide Hammer
- J 26941 Bushing and Bearing Remover 3-4 in





1. Using J 2619-01 (1) and J 26941 (2), remove the rear output shaft seal (92).





2. Using J 2619-01 (1) and J 26941 (2), remove the rear output shaft bearing assembly (89).





3. Using tool DT-47721, remove the shift shaft seal (88).