Memory Positioning Module: Service and Repair

MEMORY SEAT CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the front seat cushion.

CAUTION: Refer to SIR Caution.

2. Disconnect the electrical connectors from the heated seat module.




3. Remove the screws (1) retaining the memory seat module to the seat frame.
4. Remove the memory seat module.

INSTALLATION PROCEDURE
1. Install the memory seat module.




2. Install the memory seat module screws (1).

NOTE: Refer to Fastener Notice.

Tighten the screws 2 N.m (18 lb in).




3. Connect the electrical connections to the module.
4. Install the front seat cushion.
5. Calibrate the seat. Refer to Control Module References for programming and setup information.