81. Coolant Air Bleed Pipe Installation

Coolant Air Bleed Pipe Installation





1. Important: Position the gasket O-ring seal (308) onto the nipple portion of the pipe.

Install the seals onto the engine coolant air bleed pipe and covers.





2. Install the pipe (307) and gaskets (308).

3. Notice: Refer to Fastener Notice.

Install the bolts (309).
^ Tighten the bolts to 12 Nm (106 inch lbs.).





4. Install the covers (313) and gaskets (308).
5. Install the bolts (312).
^ Tighten the cover bolts to 12 Nm (106 inch lbs.).