88. Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation





1. Inspect the O-ring seal for cuts or damage. If the oil level indicator tube O-ring seal is not cut or damaged, it may be reused.
2. Lubricate the O-ring seal with clean engine oil.
3. Install the O-ring seal onto the oil level indicator tube.
4. Install the oil level indicator tube into the oil pan and rotate into the proper position.

5. Notice: Refer to Fastener Notice in Service Precautions.

Install the tube bolt to the right cylinder head.
^ Tighten the oil level indicator tube bolt to 50 Nm (37 ft. lbs.).
6. Install the oil level indicator into the tube.