Stabilizer Shaft Insulator Replacement

Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Remove the stabilizer shaft mounting bolts (1) and bracket (2).
3. Remove the stabilizer shaft insulators from the stabilizer shaft.

Installation Procedure





1. Install the stabilizer shaft insulators (3) to the stabilizer shaft with the slit facing rearward.

2. Install the stabilizer shaft bracket (2) and mounting bolts (1).
^ Tighten the bolts to 60 Nm (44 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

3. Lower the vehicle.