A/T - Shift Knob Loose/Rattles
Bulletin No.: 06-07-60-014Date: July 13, 2006
TECHNICAL
Subject:
Rattle Noise from Shift Knob Area/Loose Shift Knob (Remove Shift Knob, Apply Sealant and Retighten Retaining Screw)
Models:
2006 Cadillac CTS
with Automatic Transmission (RPO M82)
Built Prior to May 1, 2006
Condition
Some customers may comment about a rattle noise coming from the shifter area. The customer may also notice that the shift knob is loose.
Cause
The shift knob has a retaining screw at the base facing rearward. This screw can loosen with use and create a rattle condition. Re-tightening the screw or replacing the knob or shifter will not permanently resolve the condition.
Correction
1. Remove the shift knob retaining screw.
2. Apply 242 Blue Threadlocker (medium grade) P/N 12345382 (in Canada, P/N 10953489) to the retaining screw.
3. Install the shift knob retaining screw.
Tighten
Tighten the screw to 2.5 N.m (22 lb in).
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer