Coolant Heater Replacement - Left

Coolant Heater Replacement - Left

Removal Procedure





1. Remove the front air deflector.
2. Disconnect the coolant heater cord electrical connector (3) from the coolant heater electrical connector (2).





3. Remove the coolant heater bolt.
4. Remove the coolant heater.

Installation Procedure





1. Position the coolant heater to the engine block.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the coolant heater bolt.
Tighten the bolt to 10 Nm (89 inch lbs.).





3. Connect the coolant heater cord electrical connector (3) to the coolant heater electrical connector (2).
4. Remove the front air deflector.