Steering Wheel Position Sensor Replacement

Steering Wheel Position Sensor Replacement

Removal Procedure





1. Caution: Refer to Restraint System Caution in Service Precautions.

Disable the SIR system.
2. Remove the steering column from the vehicle.
3. Remove the following from the steering shaft:
1 The boot seal (5)
2 The steering shaft seal (4)
3 The sensor retainer (3)
4 The sensor locator (2)
4. Remove the steering wheel position sensor (1).

Installation Procedure





1. Install the following onto the steering shaft:
1 The steering wheel position sensor (1) Refer to Steering Wheel Position Sensor Centering.
2 The sensor locator (2)
3 The sensor retainer (3)
4 The steering shaft seal (4)
5 The boot seal (5)
2. Install the steering column into the vehicle.
3. Enable the SIR system.