Fan Replacement

Fan Replacement (LY7)

^ Tools Required
- J 41240 Fan Clutch Wrench

Removal Procedure





1. Remove the air cleaner intake duct.
2. Loosen the fan nut from the crank adapter shaft using J 41240 .
3. Remove the fan from the vehicle.

Installation Procedure





1. Install the fan to the vehicle.

2. Notice: Refer to Fastener Notice in Service Precautions.

Tighten the fan nut to the crank adapter shaft using J 41240 .
^ Tighten the nut to 100 Nm (74 ft. lbs.).
3. Install the air cleaner intake duct.