HVAC Control Module Replacement

HVAC CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the ashtray.




2. Remove the radio.
3. Remove the HVAC control module retaining screws.
4. Disconnect the HVAC control module electrical connectors.
5. Remove the HVAC control module.

INSTALLATION PROCEDURE
1. Install the HVAC control module.




2. Connect the HVAC control module electrical connectors.
3. Install the HVAC control module retaining screws.

NOTE: Refer to Fastener Notice.

Tighten the screws to 2 N.m (18 lb in).

4. Install the radio.
5. Install the ashtray.
6. Refer to Control Module References for programming and setup information. Programming and Relearning