Throttle Body Assembly Replacement

THROTTLE BODY ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Remove the air cleaner intake duct.




3. Remove the throttle body electrical connector.

NOTE: Refer to Disengaging Connectors Notice in Service Precautions.




4. Unlock and reposition the wiring harness conduit.




5. Remove the throttle body bolts.
6. Remove the throttle body and gasket.

INSTALLATION PROCEDURE
1. Carefully clean the throttle body mounting surfaces of any gasket and/or seal material.




2. Install the throttle body and NEW gasket.
3. Install the throttle body bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the throttle body bolts to 10 N.m (89 lb in).




4. Install the wiring harness conduit.




5. Install the throttle body electrical connector.
6. Install the air cleaner intake duct.
7. Perform the idle learn procedure. Refer to Idle Learn.
8. Use the scan tool to clear all DTCs.