P167B
DTC P167B
DESCRIPTION
This diagnostic identifies a fault in the communication system between the integrated circuit that operates the wide band heated oxygen sensor (HO2S) and the main microprocessor. If a fault is identified in the communication system, DTC P167A or P167B will set.
DTC DESCRIPTORS
This diagnostic procedure supports the following DTCs:
- DTC P167A Control Module HO2S Bank 1 Sensor 1 System Performance
- DTC P167B Control Module HO2S Bank 2 Sensor 1 System Performance
CONDITIONS FOR RUNNING THE DTC
The ignition is ON.
CONDITIONS FOR SETTING THE DTC
The ECM detects a loss of communication to the HO2S integrated circuit for more than 1 second.
ACTION TAKEN WHEN THE DTC SETS
- The control module illuminates the malfunction indicator lamp (MIL) on the second consecutive ignition cycle that the diagnostic runs and fails.
- The control module records the operating conditions at the time the diagnostic fails. The first time the diagnostic fails, the control module stores this information in the Failure Records. If the diagnostic reports a failure on the second consecutive ignition cycle, the control module records the operating conditions at the time of the failure. The control module writes the operating conditions to the Freeze Frame and updates the Failure Records.
CONDITIONS FOR CLEARING THE MIL/DTC
- The control module turns OFF the malfunction indicator lamp (MIL) after 3 consecutive ignition cycles that the diagnostic runs and does not fail.
- A current DTC, Last Test Failed, clears when the diagnostic runs and passes.
- A history DTC clears after 40 consecutive warm-up cycles, if no failures are reported by this or any other emission related diagnostic.
- Clear the MIL and the DTC with a scan tool.
TEST
