Radio Replacement

RADIO REPLACEMENT

REMOVAL PROCEDURE
1. Remove the Instrument panel (I/P) center trim.




2. Remove the bolts (1) securing the radio to the I/P.
3. Disconnect the electrical connectors.

INSTALLATION PROCEDURE




1. Connect the electrical connectors.
2. Install the bolts (1) securing the radio the I/P.

Tighten the bolts (1) to 9 N.m (80 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the I/P center trim.
4. Refer to Control Module References for programming and setup information. Programming and Relearning