Transmission Component and System Description

Transmission Component and System Description
The mechanical components of the 6-Speed RWD are as follows:
^ A torque converter with an electronically controlled capacity clutch (ECCC)
^ Vane-type fluid pump assembly
^ 1-2-3-4 and 3-5 Reverse clutch assembly
^ Input sun gear and carrier assembly
^ 4-5-6 clutch assembly with turbine shaft
^ 4-5-6 clutch hub assembly
^ 1-2-3-4 clutch hub assembly
^ 2-6 and 3-5 reverse clutch hub assembly
^ Center support assembly, with 2-6 clutch assembly, and low and Reverse clutch assembly
^ Low clutch sprag assembly
^ A double planetary output carrier assembly
^ Output shaft assembly
^ Control valve body assembly

The electrical components of the 6-Speed RWD are as follows:
^ Input and output speed sensor assembly
^ Manual shift shaft position switch
^ Control solenoid valve assembly, which contains the following components:
- Transmission control module (TCM)
- 5 variable bleed line pressure control (PC) solenoids
- Transmission fluid pressure (TFP) switch assembly
- Torque converter clutch (TCC) pressure control solenoid
- 2 shift solenoids

For more information, refer to Electronic Component Description.