Cylinder Head Assembly: Specifications

Cylinder Head
Cylinder Head Height - Deck to Camshaft Centerline Bore 136.00 mm (5.3543 inch)
Surface Flatness - Block Deck 0.050 mm (0.0020 inch)
Surface Flatness - Exhaust Manifold Deck 0.220 mm (0.0087 inch)
Surface Flatness - Intake Manifold Deck 0.220 mm (0.0087 inch)

Intake Manifold
Mounting Bolt 10 Nm (89 inch lbs.)

Cylinder Head Bolt

Right:

Important: Do Not reuse the old M11 cylinder head bolts

M11
First Pass - In Sequence 30 Nm (22 ft. lbs.)
Second Pass - In Sequence 60 degrees
Third Pass - In Sequence 60 degrees
Final Pass - In Sequence 60 degrees, total 180 degrees
M6 12 Nm (106 inch lbs.)

Left:

Exhaust Manifold
Bolt 25 Nm (18 ft. lbs.)
Nut 25 Nm (18 ft. lbs.)

Intake - Right:

Camshaft Bearing Cap Bolt 12 Nm (106 inch lbs.)

Camshaft Intermediate Drive Shaft Bolt 10 Nm (89 inch lbs.)
Sprocket Bolt 60 Nm (44 ft. lbs.)