Rear Bumper: Service and Repair

Bumper Extension Replacement - Rear

Removal Procedure

1. Remove the rear bumper fascia.
2. Remove the rear energy absorber.




3. Remove the bolts (2) attaching the extension (1) to the rear impact bar.
4. Remove the extension (1) from the impact bar.

Installation Procedure




1. Position the extension (1) to the impact bar.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolts (2) that attach the extension (1) to the impact bar.

Tighten the bolts to 25 N.m (18 lb ft).

3. Install the rear energy absorber.
4. Install the bumper fascia.