Folding Top Weatherstrip Replacement - Side Front

Folding Top Weatherstrip Replacement - Side Front

Removal Procedure




1. Manually open the folding top as shown in the illustration. Refer to Folding Top Manual Operation.
The distance (A) from the windshield header to the leading edge of the folding top panel is 400 mm (15.75 in).
2. Place a protective covering over the interior of the vehicle and the adjacent body panels.




3. Pull the weatherstrip from the weatherstrip retainer.

Installation Procedure

1. Position the weatherstrip to the folding top panel.




2. Using a plastic flat-bladed tool, start at the rear edge of the weatherstrip and insert the weatherstrip into the retainer.
3. Remove the protective covering.
4. Manually close the folding top. Refer to Folding Top Manual Operation.
5. Cycle the folding top under power through one complete cycle in both directions.
6. Inspect the folding top for proper operation.