Bracket Replacement - Driver Seat Rear Panel

Bracket Replacement - Driver Seat Rear Panel

Removal Procedure




1. Remove the finish panel.
2. Remove the retaining screws from the rear panel bracket and remove the bracket from the seat.

Installation Procedure




1. Position the rear panel bracket to the seat using 2 small punch tools to locate the bracket holes in the seat frame.
2. Remove 1 punch tool and install the retaining screw. Do NOT tighten.

Notice: Refer to Fastener Notice in Service Precautions.

3. Repeat the procedure for the remaining screw.

Tighten the screws to 2.5 N.m (22 lb in).

4. Install the finish panel.