Seal Replacement - Fender to Hood

Seal Replacement - Fender to Hood

Removal Procedure




1. Open the hood.
2. Note the location and remove the seal (1) from the fender (2).
3. Remove all remaining adhesive.

Installation Procedure




1. Clean all mating surfaces with a lint-free rag using a naptha solvent or equivalent.

Important: Mating surfaces must be dry before applying the new fender seal.

2. The adhesive and mating surfaces temperature must be between 19-43°C (66-110°F).
3. Remove the protective paper backing from the seal.
4. Position the seal (1) to the fender (2).
5. Press firmly to secure the seal to the fender.
6. Close the hood.