6. Wiring Harness Removal

Wiring Harness Removal





1. Using a small screwdriver pry the wiring harness (55) off of the following components:
^ Pressure Control Solenoid (357)
^ TCC PWM Solenoid (352)
^ 1-2 Shift Solenoid (368)
^ 2-3 Shift Solenoid (369)
^ 4-5 Shift Solenoid (376)
^ Manual Shift Shaft Switch (602)
^ Input Speed Sensor (44)
^ Output Speed Sensor (42)





2. Remove the connector retainer (54) from the case (24).





3. Remove the wiring harness (55) from the case (24).