B0051
DTC B0051
Circuit Description
The inflatable restraint sensing and diagnostic module (SDM) contains sensing devices that converts vehicle velocity changes to electrical signals. The SDM processes the generated electrical signals and compares them to values stored in memory. When the generated signals exceed the stored values, the SDM performs additional signal processing and compares the generated signals to signals stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the inflator modules, and causing DTC B0051 to set.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC B0051 Deployment Commanded
Conditions for Running the DTC
Ignition 1 voltage is within the normal operating voltage range.
Conditions for Setting the DTC
The DTC will set if one of the following conditions occur:
* The SDM detects a frontal crash of sufficient force to warrant deployment of the frontal inflator modules.
* The SDM detects a side impact crash of sufficient force to warrant deployment of a side inflator module.
Action Taken When the DTC Sets
* The SDM commands the AIR BAG indicator ON via class 2 serial data.
* The SDM records crash data.
Conditions for Clearing the DTC
DTC B0051 is a latched code. You cannot clear a latched code. Replace the SDM after following the instructions in the diagnostic table.
Test
