Ultrasonic Sensor: Service and Repair

Theft Deterrent Intrusion Sensor Replacement

Removal Procedure




1. Remove the rear dome lamp lens (1).
2. Remove the dome lamp assembly.
3. Remove the intrusion sensor from the dome lamp trim cover.
4. Release the tabs securing the intrusion sensor to the dome lamp assembly.

Installation Procedure






Important: The intrusion sensor must be secure in the locking tabs and the sensor "eyes" must be shown through the openings of the dome assembly prior to installing the assembly into the substrate.

1. Install the intrusion sensor in the dome lamp assembly.
2. Install the dome lamp trim cover.
3. Install the dome lamp lens (1).