Ash Tray: Service and Repair

Instrument Panel Ashtray Latch Replacement

Removal Procedure

1. Remove the screw behind the ashtray assembly.




2. Pull out the ashtray assembly.
3. Disconnect the electrical connectors.
4. Open the ashtray door.




5. Push the ashtray latch retaining tabs (1) with a small flat-bladed tool to release it from the ashtray assembly.



Installation Procedure





1. Install the ashtray latch (1) to the ashtray assembly.
2. Ensure that the ashtray door functions properly.




3. Connect the electrical connectors.

Notice: Refer to Fastener Notice .

4. Install the ashtray assembly. Secure with the ashtray screw.

Tighten the screw to 2 N.m (17 lb in).