Air Cleaner Housing: Service and Repair

Air Cleaner Assembly Replacement

Removal Procedure




1. Turn the ignition OFF.
2. Remove the air cleaner intake duct.
3. Disconnect the mass air flow (MAF) electrical connector.
4. Remove the air cleaner bolts.
5. Remove the air cleaner.




6. Remove the push pins (1) from the intake air baffle assembly, if necessary.




7. Remove the intake air baffle assembly from the vehicle.

Installation Procedure




1. If previously removed, install the intake air baffle assembly to the vehicle.




2. Install the intake air baffle assembly push pins (1).




3. Install the air cleaner.

Notice: Refer to Fastener Notice.

4. Install the air cleaner bolts.

Tighten the air cleaner bolts to 9 N.m (78 lb in).

5. Connect the MAF electrical connector.
6. Install the air cleaner intake duct.