Extension Housing Disassemble

Extension Housing Disassemble

Tools Required

* DT-47721 Shift Shaft Seal Installer
* J 2619-01 Slide Hammer
* J 26941 Bushing and Bearing Remover 3-4 in




1. Using J 2619-01 (1) and J 26941 (2), remove the rear output shaft seal (92).




2. Using J 2619-01 (1) and J 26941 (2), remove the rear output shaft bearing assembly (89).




3. Using tool DT-47721, remove the shift shaft seal (88).