Assist Rod Ball Stud Replacement - Hood

Assist Rod Ball Stud Replacement - Hood

Removal Procedure

1. Open and support the hood.




2. Remove the assist rod. Refer to Hood Open Assist Rod Replacement .
3. Remove the lower hood assist rod ball stud (1) from the fender (2).




4. Remove the upper hood assist rod ball stud (2) from the hood (1).



Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the upper assist rod ball stud (2) to the hood (1).


Tighten the upper hood assist rod ball stud (2) to 9 N.m (80 lb in).





2. Install lower ball stud (1) to the fender (2).


Tighten the lower hood assist rod ball stud (1) to 9 N.m (80 lb in).

3. Install assist rod. Refer to Hood Open Assist Rod Replacement .