Part 2
Driver Personalization - continued
Exterior Lights at Unlock
This feature turns on the exterior lamps when the remote keyless entry transmitter is used to unlock the vehicle. The lamps will remain on for about 20 seconds unless a door is opened, the ignition is turned to ACCESSORY, ON or START or the remote keyless entry transmitter is used to lock the vehicle.
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 1. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
Base Audio System
1. Enter the Personalization menu.
2. Scroll to EXT. LIGHT AT UNLOCK to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off.
Navigation System
1. Enter the Personalization menu.
2. Scroll to Remote Keyless Options to highlight it.
3. Press the scroll/select knob to view the modes.
4. Scroll to Exterior lights At Unlock and press the knob once to select it. When the mode is turned on, an X will appear in the box to the left.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Driver Unlock In Park, Automatic Transmission Only
The feature allows the drivers door to automatically unlock when the transmission is shifted into PARK (P).
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
Base Audio System
1. Enter the Personalization menu.
2. Scroll to DRIVER UNLOCK IN PARK to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off.
Navigation System
1. Enter the Personalization menu.
2. Scroll to Door Lock Options to highlight it.
3. Press the scroll/select knob to view the modes.
4. Scroll to Driver Unlock In Park and press the knob once to select it. When the mode is turned on, an X will appear in the box to the left. If Driver Unlock Key Out, Doors Unlock key Out or Doors Unlock In Park were previously turned on, selecting Driver Unlock In Park will override the previous choice.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Driver Unlock Key Out
The feature allows the drivers door to automatically unlock when the key it removed from the ignition.
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed with these modes turned off. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
Base Audio System
1. Enter the Personalization menu.
2. Scroll to DRIVER UNLOCK KEY OUT to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off.
Navigation System
1. Enter the Personalization menu.
2. Scroll to Door Lock Options to highlight it.
3. Press the scroll/select knob to view the modes.
4. Scroll to Driver Unlock Key Out and press the knob once to select it. When the mode is turned on, an X will appear in the box to the left. If Doors Unlock Key Out or Doors Unlock In Park (automatic transmission only) were previously turned on, selecting Driver Unlock Key Out will override the previous choice.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Doors Unlock In Park, Automatic Transmission Only
The feature allows the doors to automatically unlock when the key it removed from the ignition.
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
Base Audio System
1. Enter the Personalization menu.
2. Scroll to DOORS UNLOCK IN PARK to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off.
Navigation System
1. Enter the Personalization menu.
2. Scroll to Door Lock Options to highlight it.
3. Press the scroll/select knob to view the modes.
4. Scroll to Doors Unlock In Park and press the knob once to select it. When the mode is turned on, an X will appear in the box to the left. If Doors Unlock Key Out, Driver Unlock Key Out or Driver Unlock In Park were previously turned on, selecting Doors Unlock In Park will override the previous choice.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Doors Unlock Key Out
This feature allows the vehicles doors to automatically unlock when the key is removed from the ignition. This feature is not available if Driver unlock key Out or Doors Unlock In Park (automatic transmission only) is turned on.
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
Base Audio System
1. Enter the Personalization menu.
2. Scroll to DOORS UNLOCK KEY OUT to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off.
Navigation System
1. Enter the Personalization menu.
2. Scroll to Door Lock Options to highlight it.
3. Press the scroll/select knob to view the modes.
4. Scroll to Doors Unlock Key Out and press the knob once to select it. When the mode is turned on, an X will appear in the box to the left. If Driver Unlock Key Out or Doors Unlock In Park (automatic transmission only) were previously turned on, selecting Doors Unlock Key Out will override the previous choice.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Delayed Locking
This feature delays the locking of the vehicles doors for up to 5 seconds after a power door lock switch or the lock button on the remote keyless entry transmitter is pressed. The 5 second delay occurs after the last door is closed.
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 1. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
1. Enter the Personalization menu.
2. Scroll to DELAYED LOCKING to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off. When DELAYED LOCKING is turned on, an X will appear in the box to the left.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Lock Passenger Window
This feature allows you to disable either all the passenger windows controls or the rear passenger window controls only.
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
1. Enter the Personalization menu.
2. Scroll to LOCK PASSENGER WINDOW to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off. When LOCK PASSENGER WINDOW is turned on, an X will appear in the box to the left.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Mirror to Curb in Reverse
This feature will move the passengers outside rearview mirror to a curb view position when the shift lever is placed in REVERSE (R).
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
1. Enter the Personalization menu.
2. Scroll to MIRROR TO CURB IN REV to highlight it.
3. Press the scroll/select knob to switch back and forth between on and off. When MIRROR TO CURB IN REV is turned on, an X will appear in the box to the left.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Enhanced Chime Volume
This feature allows you to adjust the volume level of the vehicles warning chimes. The chime volume can not be turned off, only adjusted.
Programmable Modes
* Mode 1: ON
* Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 1. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
1. Enter the Personalization menu.
2. Scroll to ENHANCED CHIME VOLUME to highlight it.
3. Press the scroll/select knob to switch back and forth between the normal and loud settings. You will hear a chime as an example of the volume level chosen.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Exiting the Personalization Menu
To exit PERSONALIZATION using the base audio system, press the BACK key when you have finished making your selections. You will return to the main audio screen.
To exit Feature Programming using the Navigation system, press the button with the dot on it next to the back prompt once you have finished making your selections. You will return to the Main Menu.
Additional Information
For more information on memory seats, refer to Memory Seats Description and Operation.
For more information on outside mirrors, refer to Outside Mirror Description and Operation.
For more information on the navigation system, refer to Navigation System Description and Operation.
For more information on the automatic door locks, refer to Power Door Locks Description and Operation.
For more information on the remote keyless entry system, refer to Keyless Entry System Description and Operation.
For more information on the chimes or audible warning system, refer to Audible Warnings Description and Operation.