Floor Shift Control Boot Replacement

Floor Shift Control Boot Replacement

Removal Procedure

1. Set the parking brake.




2. Remove the shift boot from the console trim plate by lightly prying up on the rear of the shift control boot.




3. Lift the shift control boot up over the shift knob.
4. Remove the shift knob retaining screw.




5. Lift the shift control boot and knob assembly off of the shift lever.

Installation Procedure




1. Install the shift control boot and knob assembly onto the shift lever.




2. Install the shift knob retaining screw.




3. Insert the front tabs of the shift control boot into the console trim plate opening.
4. Press the rear of the shift control boot down into the console trim plate opening.
5. Tug lightly to insure the shift control boot is securely attached to the console trim plate opening.