Counter Gear Shaft Disassemble (T56 Base Model)

Counter Gear Shaft Disassemble (T56 Base Model)

Tools Required

* J 22912-O1 Split Plate
* J 39473 Mainshaft Bearing Installer
* J 39511 Split Plate
* J 39547 Press Adapter

Important: Do not replace tapered bearings unless inspection shows bearing damage.




1. Remove the small tapered bearing, using the J 22912-O1 with the J 39473 and a hydraulic press.
2. Discard the small tapered bearing.




3. Remove the large tapered bearing, using the J 39511, the J 39547, and a hydraulic press.
4. Discard the large tapered bearing.