Wiper Motor Replacement (RHD)

Wiper Motor Replacement (RHD)

Tools Required
* J 39232 Wiper Linkage Separator
* J 39529 Wiper Linkage Installer

Removal Procedure




1. Remove the wiper transmission (1).




2. Remove the drive links from the wiper motor crank arm to the wiper motor using the J 39232.
3. Remove the 3 screws retaining the wiper motor to the wiper motor module.
4. Remove the wiper motor.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the wiper motor onto the wiper motor module assembly with the screws (1).

Tighten the screws to 10 N.m (89 lb in).

2. Install the transmission drive links (3) onto the wiper motor crank arm (2) using the J 39529.




3. Install the wiper transmission (1).
4. Operate the wipers and check for proper operation.