Digital Radio Receiver Replacement

Digital Radio Receiver Replacement

Removal Procedure






Important: Do not swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock, "XM Theftlock" will be displayed.

1. Remove the rear self panel.
2. Disconnect the electrical connectors on the receiver.
3. Remove the fasteners securing the receiver to the rear shelf carrier.
4. Remove the receiver.

Installation Procedure




1. Install the receiver to the rear carrier.

Notice: Refer to Fastener Notice.

2. Install the fasteners securing the receiver to the rear carrier.

Tighten the fasteners to 2 N.m (17 lb in).

3. Connect the electrical connectors.
4. Install the rear self panel.
5. Perform the setup procedure for the digital radio receiver. Refer to Programming and RelearningProgramming and Relearning