Hood Hinge: Service and Repair

Hood Hinge Replacement

Removal Procedure

1. Open and support the hood.
2. Using a wax pencil, scribe the location of the hood hinge on the hood.
3. Apply tape to corners of panel and adjacent surfaces to help prevent paint damage.




4. Remove the hood. Refer to Hood Replacement .
5. Remove the fender. Refer to Fender Replacement - Front .
6. Remove the bolts (1) that secure the hinge to the motor compartment.
7. Remove the hinge from the vehicle.



Installation Procedure

1. Install the hinge to the vehicle.

Notice: Refer to Fastener Notice .





2. Install the bolts (1) in order to secure the hinge to the motor compartment.

Tighten the fasteners to 24 N.m (18 lb ft).

3. Install the hood using the marks scribed during removal. Refer to Hood Replacement .
4. Install the fender. Refer to Fender Replacement - Front .
5. Close the hood and inspect for fit.
6. Adjust the hood as necessary. Refer to Hood Adjustment .
7. Remove the tape from the panels.