34. Engine Flywheel Cleaning and Inspection
Engine Flywheel Cleaning and Inspection
1. Clean the flywheel in solvent.
Caution: Refer to Safety Glasses Caution.
2. Dry the flywheel with compressed air.
3. Inspect the flywheel for the following conditions:
* Pitted surface (1)
* Grooved or scored surface (2)
* Rusted surface (3)
* Damaged ring gear teeth (4)
* Loose or improperly positioned ring gear
The ring gear has an interference fit onto the flywheel and should be positioned completely against the flange of the flywheel.
* Missing, bent, or damaged pressure plate locating pins
The 2 locating pins are installed into the flywheel and spaced 170 degrees apart to ensure proper orientation of the clutch pressure plate to the engine flywheel during assembly.