Symptom 61

DTC B2880 (Symptom 61)

Circuit Description

The driver position module (DPM) determines the position of the steering column based on inputs received from a position sensor built into the tilt actuator. The DPM supplies a 5-volt reference and a ground to the sensor and monitors the column position via the tilt sensor signal circuit.

DTC Descriptor

This diagnostic procedure supports the following DTC:

DTC B2880 Tilt Position Sensor

This vehicle has DTCs which include DTC symptoms. For more information on DTC symptoms, refer to DTC Symptom Description.





Conditions for Running the DTC

DTC B1327 is not set as current.

Conditions for Setting the DTC

This DTC will set as current when the tilt actuator is commanded to move and the voltage on the tilt signal circuit has not changed.

Action Taken When the DTC Sets

The DPM will not allow the affected motor to work during memory recall and/or easy exit operations. However, the motor will still operate for manual switch positioning.

Conditions for Clearing the DTC

This DTC will clear from current status when the voltage on the tilt signal circuit changes.

Step 1 - Step 11:

Step 12: