109. Ignition Coil Module Installation - Left Side

Ignition Coil Module Installation - Left Side





Notice: Refer to Fastener Notice.

1. Install the left spark plugs.

Tighten the spark plugs to 15 N.m (11 lb ft).




2. Apply a small amount of dielectric grease GM P/N 12345579, (Canadian P/N 1974984) to each spark plug boot (1) of the ignition coil assembly.




3. Install the ignition coil assembly.
4. Install the ignition coil assembly bolts.

Tighten the ignition coil assembly bolts to 10 N.m (89 lb in).