Catalyst Shield: Service and Repair

Catalytic Converter Heat Shield Replacement

Removal Procedure

Caution: Refer to Exhaust Service Caution.

Caution: Refer to Protective Goggles and Gloves Caution.





Caution: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.

1. Remove the exhaust system.
2. Drill out the heat shield rivets (2).
3. Remove the heat shield.

Installation Procedure




1. Position the heat shield to the floor panel.
2. Using a rivet gun, install the rivets (2), except for this location (1), this rivet will be installed with the oxygen sensor heat shield.
3. Install the exhaust system.