Operation CHARM: Car repair manuals for everyone.

Scan Tool Data Definitions



Scan Tool Data Definitions

Steering Column Module (SCM)

Module Information- 8 Digit GM Part Number

This displays the part number for the SCM.

Module Information- Component Serial No. 8-11

This is the first partition of the serial number.

Module Information- Component Serial No. 12

This is the second partition of the serial number.

Data Display - Data -Motor Current

Displays amperage. This is the current being used by the motor during operation.

Data Display - Data -Telescope Sensor

Displays sensor feedback counts or voltage. Voltage available on scan tool through soft key in the data list.

Data Display - Data - Telescope Tilt Output

Displays the module output command state.

Data Display -Data -Telescope Tilt Switch

Displays switch state which are Idle, In, Out, Up, or Down.

Data Display - Data - Tilt Sensor

Displays sensor feedback counts or voltage. Voltage available on scan tool through soft key in the data list.

Module Information- Calibration ID

This displays the calibration or program revision level used in the PROM.

Module Information- Julian Date Of Build

This displays the day of the year the module was built.

Module Information- PROM ID

This displays the four digit number of the PROM incorporated into the Steering Column Module (SCM).

Module Information- Year Module Built

This displays the four digit year of build.